思思99热re久久最新地址获取

 手动工具 Manual Tool                                                                                     

• STK provides the whole manual tools which is applied for high pressure.It can be manually complete the inner hole、chamfering cylindrical、teeth、steel tubing thread.

STK提供完整的用于超高壓應用的手動工具,能夠手動地完成內孔倒角、外圓倒角、鋼管扳牙等。

• Size range can be machined in the 1/8”~9/16”,convenient installation , test and repair.

尺寸範圍在1/8"~9/16"都能夠加工,方便現場安裝,調試,維修。

• The STK tool is the only ultra pressure tool manufacturer in China,our products can replace foreign products perfectly.

STK是中國高品質超高壓工具的生産商,其産品完美地替代了進口産品。

 手动工具 Manual Tool                                                                                       

• Coning Tool can process tubing taper,angle is about 57°~59°.

倒外圓錐工具可以加工鋼管的錐度,角度約57°~59°。

• Chuck and bit tool can be replaced,the same tools can be processed tubing of 1/4 "O.D、3/8 " O.D、9/16" O.D.

夹头,刀具可以更换,同一个工具可以加工 1/4" O.D、 3/8"O.D、9/16"O.D钢管。

• Adjusting gland nut,can adjust the depth of processing.

調節壓緊螺母,可以調節加工的深度。

技术参数 Tecnnical Parameter

型號

Part No.

鋼管尺寸

For Tubing Size

CT2 1/8"O.D
CTA 1/4"O.D
3/8"O.D
9/16"O.D

 手动工具操作指南 Manual Tool Operation Guideline                                        

倒外圓錐操作說明 Inverted conical operation instruction

• Clamping fixed block of coning tool.

把倒外圓錐工具上固定塊固定。

• Adjust the slot width is slightly larger than the length of the cutting cone , loosen the gland nut , put the tube into the collets inside ,l ock gland nut.

調整退刀槽的寬度稍大于切削錐面長度,松開螺母,把鋼管插入夾頭裏面,鎖緊螺母。

• In the observation hole drops into the cutting oil , so that the cutting edges maintain lubricating.

在觀察孔上滴進切削油,使切削刃上保持潤滑。

• Right hand turn the handle,at the same time left hand rotation screw gland nut(clockwise) , at the beginning of the handle feels heavier , when the rotary gland is screwed almost to the end , speed up the rotation speed of the handle , When handle feels relaxed , show that complete the cutting , loosen the gland , pull out the tube and check the cone if is suitable , if not , continue above operation.

右手轉動手柄同時左手也旋轉旋緊螺母(順時針),初期手感較重,當旋緊螺母接近到底時,加快手柄旋轉速度;當手感輕松,表明切削完成,把螺母松開,抽出鋼管觀察錐面是否合適,如不夠繼續上述操作

手動工具操作示意圖


 
咨詢熱線
0755-27967260
銷售熱線
18688799549